You are now ready to use your A40 TR System on your Computer. If your computer does not feature an optical output and you’re using only the USB cable to connect, locate the ASTRO MixAmp Pro and set as default device.Ĭonnect your A40’s to your MixAmp TR by plugging the Inline mute cable into the headset, and the other end of the cable into the port on the MixAmp TR with the headset icon. Ensure that Dolby Digital Live is enabled and DTS is disabled, if featured, and that the sampling frequency is set at 48.0 kHz. Right click the device and navigate to Properties > Supported formats. If your computer features an optical output, locate the digital optical output and set this as your default device. Next, Right click the speaker icon in your task bar and select “Playback devices”: You will see the power buttons LED light illuminate from red to white. To do this, hold down the power button on the MixAmp TR for 3-5 seconds. If you’re also using a optical cable, hook up the optical cable to the optical port on your computer. Insert the MixAmp TR USB Power cable to a USB port on your PC. Ensure the MixAmp TR is connected to the USB Port on your PC in order to update it on your PC through the ASTRO Command Center.Ĭonnect the MixAmp TR to your PC. USB Power Cable, Optical Cable, and A40 Inline Mute Cableįirst, ensure the MixAmp TR has the most recent firmware installed. The free software enables full customization of the C40 TR Controller including:įor any additional help, please reach out to our Customer Service team.For the video setup guide, please visit: The ASTRO C40 TR Controller has additional customization options via the ASTRO C40 TR Configuration Software, available at /software. The USB Transmitter and C40 TR Controller LED will turn solid once pairing is completed. The LED on the USB Wireless Transmitter will flash on white.Īfter a few seconds the C40 TR Controller and USB Wireless Transmitter will pair. ASTRO Command Center Access and manage your ASTRO gaming devices Baixar agora 12.2 MB 3.0 em 5 votos Desenvolvedor: ASTRO Gaming Licena: Gratuito Total de downloads:885 (6 na ltima semana) Sistema operacional:Windows Vista/7/8/10/11 Latest version:1.1. The Transmitter will then enter into pairing mode. Press and hold the LED Button on the USB Wireless Transmitter for 5 seconds. The C40 TR Controller will then enter into pairing mode. Press and hold both the Start and Share Buttons simultaneously for 5 seconds. In the event your C40 TR Controller becomes unpaired:Įnsure the C40 TR Controller is powered on and ensure the USB Wireless Transmitter is plugged into a PC. That’s it, your C40 TR Controller is ready to game! When the modules are in the desired configuration, replace the controller Faceplate and tighten the screws using the C40 TR Tool in the same star pattern. When swapping modules, ensure the red line located on the bottom of the module align with the red line located on the controller. The screws will remain attached to the Faceplate. We strongly recommend removing the screws in a star pattern (upper right, bottom left, bottom right, upper left). Using the C40 TR Tool, unscrew the 4 screws on the Faceplate of the C40 TR Controller. The Analog Stick Modules and the D-Pad Module are removable and swappable. That’s it! Your C40 TR Controller is ready to game. Your PC will automatically read and install drivers enabling the C40 TR Controller for use. Plug the USB-A end of the micro-USB cable into an available USB port on your PC. That’s it! Your C40 TR Controller is ready to go!Įnsure the C40 TR Controller Mode Switch is set to Wired. Follow the on-screen prompts to update the firmware. To check for firmware updates, click on the Configuration Wheel located at the top right corner of the software window. Plug the USB Wireless Transmitter into an available USB port on your PC. To be fair, you should plan on upgrading soon as the licence key you own for Windows 8.1 should be fine for both Windows 10 and Windows 11. To update your USB Wireless Transmitter, first disconnect the C40 TR Controller from your PC or Mac. The ASTRO Command Center is only available for Windows 10 and 11. You will automatically be prompted to update the firmware of your controller after launching the C40 TR Configuration Software.Ĭlick on the Update Now button and follow the on-screen prompts to update the firmware on your controller. Run the ASTRO C40 TR Configuration Software. Plug the USB-A end of the micro-USB cable into an available USB port on your PC or Mac. Plug the micro end of the micro-USB cable into the C40 TR Controller. Please make sure that you are downloading the C40 TR Configuration Software and not ASTRO Command Center as ACC is not compatible with the C40 TR Controller.Įnsure the C40 TR Controller is in Wired Mode. This guide will provide you with all of the information you will need to setup your C40 TR Controller with your PC or Mac.īefore use, this product may require a firmware update.ĭownload the ASTRO C40 TR Configuration Software from /software.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |